top of page

Tomas Moreno

Public·38 members
Alonso Krylov
Alonso Krylov

Creality CR Touch: How to Download and Install the Firmware for Your 3D Printer


Creality CR Touch Download: A Guide for 3D Printer Users




If you are looking for a way to improve your 3D printing experience, you might want to consider adding an automatic bed leveling sensor to your printer. One of the most popular options on the market is the Creality CR Touch, a device that can measure the distance between the nozzle and the bed and adjust it accordingly. This can help you avoid issues such as poor adhesion, uneven layers, and nozzle clogging.


But how do you download and install the Creality CR Touch on your printer? And how do you use it for auto bed leveling? In this article, we will answer these questions and more. We will explain what is Creality CR Touch, what are its features and benefits, what are its compatibility and requirements, and how to download and install its firmware and hardware. We will also show you how to use it for auto bed leveling and provide some FAQs at the end.




creality cr touch download



What is Creality CR Touch?




The Creality CR Touch is an automatic bed leveling sensor that can be used with various 3D printers from Creality, such as Ender 3, Ender 5, CR-10, etc. It is similar to the popular BLTouch sensor, but it has some differences in design, performance, and installation. The Creality CR Touch uses a metal probe instead of a plastic pin, which makes it more durable and accurate. It also has a simpler wiring scheme, which makes it easier to install.


Features and benefits of Creality CR Touch




Some of the features and benefits of using the Creality CR Touch are:


  • It can automatically detect the height of the bed and compensate for any unevenness.



  • It can improve print quality by ensuring a consistent first layer.



  • It can save time and hassle by eliminating manual bed leveling.



  • It can work with any bed surface type or material.



  • It can be reused more than 100,000 times.



  • It has stable quality and long service life.



Compatibility and requirements of Creality CR Touch




The Creality CR Touch is compatible with most FDM 3D printers from Creality that have a 32-bit mainboard. Some of these models are:


  • Ender 3 V2



  • Ender 3 Pro



  • Ender 5



  • Ender 5 Pro



  • CR-10



  • CR-10 V2



  • CR-10 V3



To check your printer model and mainboard version, you can look at the sticker on the back of the printer or open the printer menu and go to "About Printer". You will see the model name and the mainboard version number. For example, Ender 3 V2 with 4.2.2 mainboard.


The Creality CR Touch also requires a firmware update to work properly. The firmware is the software that controls the printer's functions and settings. You need to download the latest firmware from Creality's website and install it on your printer using a micro SD card. We will explain how to do this in the next section.


How to download and install Creality CR Touch firmware?




Before you can use the Creality CR Touch sensor, you need to update your printer's firmware to enable the auto bed leveling function. This is a simple process that takes only a few minutes. Here are the steps you need to follow:


Step 1: Check your printer model and mainboard version




As we mentioned before, you need to know your printer model and mainboard version to download the correct firmware. You can find this information on the sticker on the back of the printer or in the printer menu under "About Printer". For example, Ender 3 V2 with 4.2.2 mainboard.


Step 2: Download the appropriate firmware from Creality website




Once you know your printer model and mainboard version, you can go to Creality's website and download the firmware that matches your specifications. You can find the firmware files under the "Download" section of each product page. For example, for Ender 3 V2 with 4.2.2 mainboard, you can go to and download the file named "Ender-3 V2_32bit_4.2.2V_Marlin-2.0.1V1.3.1_BLTouch.bin". This is the firmware file that supports the Creality CR Touch sensor.


creality cr touch firmware update


creality cr touch installation guide


creality cr touch auto leveling kit


creality cr touch ender 3 v2


creality cr touch calibration


creality cr touch vs bltouch


creality cr touch manual pdf


creality cr touch troubleshooting


creality cr touch ender 5 plus


creality cr touch review


creality cr touch slicer settings


creality cr touch z offset


creality cr touch ender 3 pro


creality cr touch compatibility


creality cr touch sensor


creality cr touch wiring diagram


creality cr touch marlin configuration


creality cr touch ender 6


creality cr touch gcode commands


creality cr touch bed leveling test


creality cr touch ender 5 pro


creality cr touch dimensions


creality cr touch source code


creality cr touch ender 3 max


creality cr touch nozzle cleaning


creality cr touch firmware version history


creality cr touch user manual v1.1 download


creality cr touch ender 3 s1 pro 3d printer


creality cr touch replacement parts


creality cr touch software download center


creality cr touch ender 5 s1 3d printer


creality cr touch how to use


creality cr touch setup video tutorial


creality cr touch ender 3 s1 3d printer


creality cr touch support service center


creality cr touch product faqs page


creality cr touch ender 5 plus silent mainboard firmware


creality cr touch warranty policy information


creality cr touch official online store link


creality cr touch ender 6 silent mainboard firmware


Step 3: Copy the firmware file to a micro SD card




After you download the firmware file, you need to copy it to a micro SD card that has a capacity of 8GB or less and is formatted in FAT32 file system. You can use any SD card reader or adapter to connect the SD card to your computer and copy the file. Make sure you rename the file to "firmware.bin" before copying it to the SD card. This is important for the printer to recognize and update the firmware.


Step 4: Insert the SD card into the printer and power it on




Once you have copied the firmware file to the SD card, you can insert it into the slot on the mainboard of your printer. Make sure you turn off the printer and unplug the power cord before doing this. Then, plug in the power cord and turn on the printer. You will see a blue LED flashing on the mainboard, indicating that the firmware update is in progress. This may take a few seconds or minutes depending on your printer model.


Step 5: Wait for the firmware update to complete




When the firmware update is complete, you will see a message on your printer screen saying "Firmware Update Done". You can then remove the SD card from the mainboard and restart your printer. You will notice some changes in your printer menu, such as a new option for "Leveling" under "Prepare". This means that your printer is now ready to use with the Creality CR Touch sensor.


How to download and install Creality CR Touch hardware?




Besides updating your printer's firmware, you also need to install the Creality CR Touch hardware on your printer. This involves mounting the sensor on the X-axis carriage, running the wires along the extruder cables, and connecting them to the mainboard and the sensor. This is also a simple process that takes only a few minutes. Here are the steps you need to follow:


Step 1: Turn off the printer and unplug the power cord




Before you start installing the Creality CR Touch hardware, you need to make sure that your printer is turned off and unplugged from the power source. This is to avoid any electric shock or damage to your printer.


Step 2: Mount the CR Touch sensor on the X-axis carriage




The Creality CR Touch sensor comes with a metal bracket that allows you to mount it on the X-axis carriage of your printer. You need to use a hex wrench and some screws to attach the bracket to the carriage. You also need to remove the original Z-axis limit switch from the carriage and replace it with a plastic spacer that comes with the sensor. The spacer will prevent the nozzle from hitting the bed when the sensor is triggered.


Step 3: Run the wires along the extruder cables and secure them with zip ties




The Creality CR Touch sensor has two wires: a black one and a white one. The black wire is for power and signal, and the white wire is for ground. You need to run these wires along the extruder cables and secure them with zip ties. Make sure you leave some slack in the wires to allow for movement of the X-axis carriage.


Step 4: Connect the wires to the mainboard and the CR Touch sensor




The next step is to connect the wires to the mainboard and the CR Touch sensor. You need to open the bottom cover of your printer and locate the mainboard. You will see a port labeled "Z-PROBE" on the mainboard. This is where you need to plug in the black wire of the sensor. The white wire needs to be connected to any ground pin on the mainboard. You can use a dupont connector or a soldering iron to make this connection.


After you connect the wires to the mainboard, you need to connect them to the CR Touch sensor as well. The black wire goes into the port labeled "ZMIN" on the sensor, and the white wire goes into the port labeled "GND" on the sensor. You can use the provided connector to make this connection.


Step 5: Turn on the printer and test the sensor function




The final step is to turn on the printer and test the sensor function. You can do this by going to the printer menu and selecting "Prepare" > "Leveling" > "Auto Home". This will move the nozzle to the h


About

Welcome to the group! You can connect with other members, ge...

Members

bottom of page